The Metal Wall Flashing is used in conjunction with the Rubberall Lap Caulk Sealant to create a waterproof junction on the wall junctions or up-stands. In addition, it can also be used as a Gutter Edge Trim when installing Metal Edge Details.
This installation requires an angle grinder to chase into the brickwork or render. However, if you do not have an angle grinder you may use a termination bar along with MS sealant and water cut-off mastic to create a waterproof finish.
- Create a bead of water cutt-off mastic on the wall, behind the rubber and screw the termination bar onto this beading.
- Then, finish the job with a bead of MS Sealant above the termination bar to ensure water tightness.
- Note: the wall must be flat for this type of installation.
- When using the Metal Wall Flashing as an up-stand trim the membrane is dressed under the wall trim for a waterproof finish.
Metal Wall Flashing 3m x 70mm x 30mm
If you have any queries, please get in touch with our friendly team. Call us if you are unsure about the materials you need for your roof on 01392 927729 or email [email protected]. You can also check out our Roof Calculator that estimates all the materials you will need for your rubber roofing project.