Enter the four outside measurements of your L-shaped roof, matching the numbers on the diagram. The two inner step measurements (2 & 3) are worked out for you. Don't add anything for overhangs β we add 200mm to every side automatically.
1
6
5
4
2
3
Total area0 mΒ²
Perimeter0 m
Rubber sheet join
The two rubber sheets will need to be joined along the orange line shown on the diagram β we include the seam tape for this in your quote. Choose whichever direction suits your roof.
Covering an "L" shape? Choose "L-shaped" above and enter the outside
measurements β we'll work out the inner steps and where the rubber sheets will need to be joined.
Step 2: Click each edge of your roof and choose its type
Click each numbered edge of your L-shaped roof and choose what it meets (wall, gutter, kerbβ¦). The join between the two sections is handled automatically β you don't need to mark it.
A
Click to select the type of roof edge
C
Click to select the type of roof edge
B
Click to select the type of roof edge
D
Click to select the type of roof edge
Please select the colour of the trim you would like
Please select the thickness of the EPDM rubber
Additional Options
**** Note: There is a difference between roof size and rubber size. We have added 200mm extra on each side
which will cover most situations i.e. overhang / upstands / slope off / slope on ****For multiple quotes please consider additional trim will be added for overlap β items can be deleted from your
shopping basket.If you require further information regarding sizes required for your rubber or any other components then please
contact our sales office.
Step 3: Your Quote Summary
Save or email this quote
We'll send you a copy with a link to re-open this quote later and a one-click link to add everything to your cart. A copy will also be sent to Rubber Flat Roof so we can help if you need it.
×
Choosing a selection results in a full page refresh.