We are currently running a 2 to 3 day delivery service.

Rain Water / Drain Outlet - 75mm

This 75mm Rain Water Outlet is a flat roof synthetic rubber drain outlet for downpipes. To be used with EPDM Rubber Roofing installations, the wide base with ribbed surface provides ample anchorage for the membrane.

£17.08 £20.50
In stock
SKU
DRAIN-RD-75
For next working day delivery

This Rain Water / Drain Outlet – 75mm is a flat roof synthetic rubber drain outlet for downpipes. To be used with EPDM Rubber Roofing installations, the wide base with ribbed surface provides ample anchorage for the membrane. The flanges on the cylinder form a seal with the inner surface of the pipe.

At Rubber Flat Roof, we supply the following sizes:

How to use:
  • Once rubber has been laid, Cut hole for drain to go through.

    Apply water cut off mastic to under side of flange, Then fix down using fixing plates.

    Apply Primer to drain unit and surrounding EPDM (Min 2” / 50mm cover) using scrubpad

    Lay appropriate sized flashing tape over complete drainage unit and onto EPDM ( Recommended 0.5m of 18” flashing tape over primed area.)

    Cut hole in flashing tape to allow water to drain off roof.

If you have any queries, please get in touch with our friendly team. Call us if you are unsure about the materials you need for your roof on 01392927729 or email sales@rubberflatroof.co.uk. You can also check out our Quote Tool that estimates all the materials you will need for your rubber roofing project.