QuickClad Bonding Adhesive Black 600ml (SikaBond TF Plus N) single/box 20
QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) is a 1-component, PU- based adhesive for our facade membrane system, which combines high mechanical strength with the necessary elasticity to cope with high movements in facades. QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) adheres excellent to a wide range of substrates.
You can buy this in either singular foils or a box of 20.
Note: Gun sold separately
RECOMMENDATION
This product is suitable for experienced pro- fessional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
PRODUCT BENEFITS
▪ Secure application with good sag resistance ▪ Bonds well to concrete, aluminium (anod- ized or powder-coated), rigid U-PVC, timber and other standard construction materials
▪ Application of adhesive to one side only (mostly to substrate)
▪ Ensures levelling of substrate
▪ No contact pressure necessary
▪ Fast curing
▪ Adjustment of membrane possible until 30min. after installation
AREAS OF APPLICATION
This is used for bonding our QuickBond facade membranes behind curtain walling and rainscreen cladding. QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) is also suitable to bond overplasterable membranes to concrete and brick wall in window installation.
Application
QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) can be processed between 5 °C and 40 °C but changes in react- ivity and application properties have to be considered. The optimum temperature for substrate and adhesive is between 15 °C and 25 °C. Until the adhesive is fully cured the substrate temperature must be in between 5 °C and 40 °C.
To avoid condensation on the surfaces, the temperature of the bonding substrates must be at least 3 °C higher than the dew point of the air.
The skin time is significantly shorter in hot and humid climate.
QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) can be processed with hand, pneumatic or electric driven piston guns.
Removal
QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) can be removed from tools and equipment with a suitable solvent. Once cured, the material can only be removed mechanically.
Hands and exposed skin have to be washed immediately using hand wipes such as a suitable industrial hand cleaner and water.
Do not use solvents on skin.
Application Limits
Where two or more different reactive sealants are used, allow the first to cure completely before applying the next.
The compatibility of gaskets, backer rods, and other accessory materials in contact with QuickClad EPDM bonding Adhesive Black 600ml foil (SikaBond TF Plus N) must be tested in advance.
Don’t use the adhesive directly on bituminous, plasticiser bleeding or formwork oil containing substrates.
FURTHER INFORMATION
The information herein is offered for general guidance only. Advice on specific applications is available on request from the Technical Department of Sika Industry.
