Quickbond EPDM Primer / Seam Tape Primer

Quickbond EPDM Primer / Seam Tape Primer
Quickbond EPDM Primer is a solvent-based primer designed to clean and prime RubberCover EPDM Membrane and many other substrates, promoting a very strong bond for EPDM tapes.

The Seam Tape Primer is available in the following options:

250ml - Coverage up to 2 sqm
500ml - Coverage up to 4 sqm
1Litre  - Coverage up to 8 sqm

Tips for use:

• EPDM Tape Products will not adhere or perform over time if EPDM Primer is not used.
• EPDM Primer should be allowed to flash off (not wet or stringy) before applying any EPDM tapes to the primer.
• The primer should be applied with a Scrub Pad to prepare the EPDM Membrane to receive the tape for the best adhesion.
• Solvent-based EPDM primer must be used in a well-ventilated area.

EPDM Primers are mainly used to bond tapes and accessories to an EPDM rubber membrane. The same primer is used for bonding EPDM tapes to other substrates such as masonry, timber, plastics & metals. 

Please note: If EPDM Primer is not used, the surfaces will not be properly bonded together 

If you have any queries, please get in touch with our friendly team. Call us if you are unsure about the materials you need for your roof on 01392 927729 or email sales@rubberflatroof.co.uk. You can also check out our Roof Calculator that estimates all the materials you will need for your rubber roofing project.