Video Tutorials


Below are all the videos you will need to help you install your EPDM rubber flat roof.


Part 1 - How to estimate for a Rubber Flat Roof

How to estimate for a Rubber Flat Roof. Measure up including upstand - decide what us in each edge of the roof and then call your local RubberCover stockist or Plytech for further information.

   

Part 2 -  How to install EPDM rubber onto a flat roof

This informational video demonstrates how to install EPDM Rubber onto a flat roof. The rubber flat roof is installed using a water-based adhesive for the main field area and then a contact adhesive for the perimeter and upstand. 


               

        Part 3 - How to install Quicktrim roofing trims

How to install Quicktrim Roof Edge Detail. Installing a Water / Check Kerb detail. Installing a Drip edge / Gutter edge detail.

        Part 4 - How to Install RubberCover EPDM Rubber onto an upstand / wall.

How to Install RubberCover EPDM Rubber onto an upstand / wall. How to waterproof corners using flashing tape. Use of a metal wall flashing to waterproof EPDM Rubber on an upstand / wall.

   

        Part 5 - How to install internal and external corner details on your rubber roofing project.

Learn how to professionally install RubberCover EPDM rubber roofing on both external and internal corners with precision and confidence.


        Part 6 - Installing EPDM - Water-based & Contact Adhesive

Installation video demonstrating how to install EPDM Rubber Roofing membrane using water-based adhesive for the main deck area and contact adhesive around the perimeter edge. Products used during this rubber flat roof demo: RubberCover EPDM rubber roofing membrane Quickbond water-based bonding adhesive Quickbond contact adhesive.


 

        Part 7 - Adhesive Application Contact Adhesive with Roller & Spray

Installation video demonstrating how to install EPDM Rubber Roofing membrane using Solvent-based / Contact adhesive for the whole roof area.



        Part 8 - EPDM External Corner Flashing Detail

This method shows the EPDM rubber being joined on the corner using 6inch Cover Tape and primer and also an EPDM flashing tape (circular patch) being installed to make the external corner completely watertight


        Part 9 - EPDM Internal Corner Flashing Detail

Installation video demonstrating how to install EPDM Rubber Roofing membrane into an internal corner.


        Part 10 - Joining EPDM Using Seam Tape

Installation video demonstrating how to join EPDM Rubber Roofing membrane using an overlap seam tape join.