EPDM 9" Corner Flashing - 300mm of 9" Flashing Tape

EPDM 9" Corner Flashing - 300mm of 9" Flashing Tape

Designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 229mm uncured flashing can also be used to create an inexpensive pipe boot. 
Installation Notes: The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever un-cured flashing tapes are to be used the surface must be primed with QuickBond Primer and allowed to dry (touch dry), smooth side down!

If you have any queries, please get in touch with our friendly team on 01392 927729 or email sales@rubberflatroof.co.uk. You can also check out our Roof Calculator that estimates all the materials you will need for your rubber roofing project.