Terminating RUBBERALL® On Fascia

Bring the EPDM membrane over edge of roof by approximately 10.16cms. Where the membrane wraps over an inside or outside corner to create a flap. Then tack to one side of the fascia with a roofing nail. Using a Termination Bar, in either 1.524mtrs or 3.048mtrs lengths, and an appropriate length screw, secure the Termination Bar with a screw in every hole. Leave a 6.35mm gap between Termination Bars for expansion.

A Termination Bar can easily be bent around an outside corner. With a utility knife cut excess membrane from the bottom side of the Termination Bar and apply a bead of Lap Caulk to the top. It is also advisable to put a spot of Lap Caulk over each screw to prevent water from penetrating around screw and rotting the fascia.